Search results

I think he looks like Uncle Fester.

Real smart to punch a guy wearing a full face helmet. Old guy is lucky the rider didn't headbutt him with it.

I would give Chris at Redshift motorsports a call. He can make you quick struts with Koni dampers and new Honda OEM hardware. http://store.redshiftmotorsports.com/category-s/110.htm He is in PA so you would get them quick and he use to work for Honda and knows his stuff. That is what I did when...

Nice bike and I think you made a wise choice.

I've never tried the fluid film but I do clean the mowing deck after each use and that seems to keep the rust away.

Originally Posted By: HerrStig How is the oil drained? I use an oil extractor on my Honda. Remove oil fill/dipstick and tip mower on it's side. I have a oil extractor but never use it.

Last week after mowing my yard in 85+ deg I decided I wanted a new power drive mower and decided on another new Husqvarna model. My yard in 100% flat and I never bag so I went with this reasonably priced front wheel drive model available on Amazon here...

Some folks I know make their own fiberglass nosecones for armature high power rocketry. For a fiberglass mold release they use Henkel Loctite Frekote 770-NC available here http://www.ellsworth.com/products/by-mar...CFQcxaQodKGMAIg Maybe it would work for your application? If you want to take...

Originally Posted By: JHZR2 Originally Posted By: 1foxracing Wright tool is available in Denmark INTERNATIONAL TOOLS AGENCY A/S Claus Glimsager Vaevergangen 22C, DK-2690 Karlslunde Karlslunde, Roskilde Denmark Phone: 011-45 5614 0926 Fax: 011-45 5614 7926 Email: [email protected] All of my...

I do have 2 Facom wrench sets, the metric obstruction set and the angle socket wrench set. I don't use either of them often but have no complaints with either. Beta at one time was the OEM tool maker for Ducati and I owned several of their specialty tools. As far as I know Beta hasn't...

Yes, Wright only makes round head ratchets. All of these are Wright models. Here is the website for Wright Tool http://www.wrighttool.com/ Link to the online catalog http://www.wrighttool.com/online_catalog.asp

The 70mm is flat stem with a satin finish, here it is with a 6mm on top to show the profile better. Their smaller wrenches up to 36mm are available in either satin or fully polished. I own both sets. If you want 1/2 drive 6 point sockets in Chrome Wright tool doesn't make them ( they do...

No problem, Wright should have you covered even in the larger sizes. I know they make up to 80mm wrenches and sockets even larger. The largest I have in Wright wrenches is 70mm

Wright tool is available in Denmark INTERNATIONAL TOOLS AGENCY A/S Claus Glimsager Vaevergangen 22C, DK-2690 Karlslunde Karlslunde, Roskilde Denmark Phone: 011-45 5614 0926 Fax: 011-45 5614 7926 Email: [email protected] All of my sockets are either Wright or S-K, use either with confidence

I think if you are comfortable doing that other stuff on your car you can pull off this valve adjustment. I'm a motorcycle mechanic and most of those engines require pulling the cams and changing shims. A car engine with a screw & locknut is a walk in the park comparatively. You can purchase a...

Also change the cabin filter, it's behind the glovebox if you don't know.

Nice Dove, I have something a little bigger in my back yard.

Astro14, Were you on the East coast for your total time? I was just curious if they used the T2-C in the East for flat spin recovery training on the East coast? I was in VF-126 at NAS Miramar 88-92 and we had 4 T2-C's that were were used for F-14 flat spin recovery training here. We were...

for my main combo wrenches I use the Ernst rails from Summit Racing. http://www.summitracing.com/parts/eni-6015m My SK sets came with nice rails, deep off-sets stand on edge just fine. Gearwrench Gearbox models come in a nice tray. I haven't found any kind of organizer that works...

Originally Posted By: 29662 Yeah I couldn't believe they did that given how much better an inline 4 sounds than a straight piped v twin. For the record, the bike is a '92 Honda cb750 nighthawk with an R6 front end and a few other odds and ends from different bikes. OK, I don't watch TV so...