Search results

  1. C

    Where to find PUP or Castrol Edge Extended??

    Originally Posted By: Gokhan M1 EP 0W-20 is priced $3.74 after $2 rebate. PUP 0W-20 is priced $10.03 after $2 rebate. This is a huge price difference to justify PUP. Recent TDS's showed that PUP 0W-40 had a NOACK of 13% and PUP 5W-30 11.5%. These rather unimpressive NOACK numbers show that its...
  2. C

    New to air compressors - hose suggestions

    Wth 1/4" fittings you don't need a valve fitting to pump up tires. You just use the end of the hose,as long as the valve on the tire is long enough to reach the inside of the hose. You just use the hose fitting itself and push it over the valse stem. Little trick I learned after having lost...
  3. C

    Oil recommendation for cbr900rr track bike

    Originally Posted By: DrDave Greetings: In my Sportster I changed from 15-40 to 10-30 oil. I have UOA data for each oil. The 10-30 showed significantly lower wear metals. I don't see how that comports with your theory. I would be interested in Larry's comments as well. Dave You are aware...
  4. C

    Subies, the engines again...

    Originally Posted By: AZjeff People who think a quart in 2K usage is OK for a low mileage car most likely don't own one. Unacceptable. I'm not saying it's right however if the oem claims it's acceptable what can a person really do. I do find it brutal that the op was barely in the...
  5. C

    50w drive train oil

    Originally Posted By: Shannow Clevy, just like engine oils, there's no "50W", just this set use the same "seconds through the viscometer" that gave us out 20, 30, 40, and 50 grade engine oils. The specs are tighter for TO-4 than for SAE J300, i.e. So don't think that an engine oil can take...
  6. C

    Dodge Charger Hellcat vs. Tesla Model S 4WD

    Originally Posted By: Benito Not all 300's are cheap though: http://www.obamas300c.com/ Ha. That's funny. And no way is a 300 a gas guzzler. With mds the hemi gets 25 mpg no sweat and I've seen 30mpg on mine after tuning,no headwind. So he Obama trades up for a hybrid that for 34mpg on...
  7. C

    Would you use this older synthetic oil in your car

    Originally Posted By: ShotGun429 At the Speed Shop here,we have 100+ cases of Mobil 1 from the Indy Car series of that era, dated 1989 and we use it in everything,even the newer cars and trucks in our fleet here, Nary a problem!!!! Is it the old red cap stuff. Or the tri-syn. That's when Mobil...
  8. C

    which is the "best" oil.........

    If I didn't have to pay for oil it would be redline all the way. You're wrong about amsoil. Everything about them is marketing fluff. Sure they make a decent oil however it costs double,and no way is it twice as good. I'm not really a Mobil fan however they too make a great product...
  9. C

    Cold flow here is overrated

    Originally Posted By: dlundblad I will say i wouldnt mind having a block heater. My good friend had one in his Yoda.. It was on a timer and turned on a few hrs each day before he left work. The recirc type are the best and easily plumbed in to a coolant line. It heats the coolant so well...
  10. C

    Break-in additives and new engines?

    Originally Posted By: TheRuss Originally Posted By: ARCOgraphite Too late; You did it now! What oil went in? This is a largish sump is it not? And expensive proposition with no perceived benefit? Indeed, too late! I'm not worried about it being wasted cash - in my head I'm getting rid of any...
  11. C

    50w drive train oil

    Originally Posted By: Doug Hillary Hi, sdan27 - As Molakule states this is a common viscosity in Eaton multispeed transmissions. Check the correct viscosity for yours though - the TO4 requirement is a OEM Spec I used both Castrol and Delvac Syn 50 lubricants in my 13spd and 18spd Eaton...
  12. C

    50w drive train oil

    Originally Posted By: MolaKule Originally Posted By: Clevy What is 50w? I've never seen anything labelled even remotely as such. So please specify what product you are referring to because 50w isn't a thing. 50W transmission lubes are common in multi-gear ratio HD truck transmissions. I would...
  13. C

    looking for experiences with different oils

    The only thing I've read/heard was that the jeep 4.0 engines and Subaru are noisy with m1,other than that I've got nothing. Our members here with jeeps seem to like pyb. From what I've read here it's the flavour favorite. I use a different oil for basically every oil change. A couple times...
  14. C

    Subies, the engines again...

    Originally Posted By: dishdude A new car shouldn't need multiple quarts of top off between ocis. You can't blame the driver for that. It doesn't mean one shouldn't check. It's part of basic maintenance. Even if the engine wasn't an oil burner a person still needs to check whether coolant is...
  15. C

    Fully cutting the cord...

    They charge you for the iPhone hotspot. Wow. Anyways I cut the cord about a year ago and in no way do I miss not having and paying for cable. I've got both an android box and my Apple TV. But I'm not tethered to my phone. I have used the hotspot countless times for my boy and I to use our...
  16. C

    Subies, the engines again...

    I think this all boils down to improper break in. Subaru is having so many issues they should sell them pre-broken in. I'd bet it saves them tons of grief. But let's get serious here. Some idiot says she had to add 4 quarts of oil. Is she a retard? Do these people buy a new vehicle and not...
  17. C

    Small Engine - Dino Break In

    Originally Posted By: Bluestream The truth is it doesn't really matter what you're going to use Nope it doesn't. Though it does make you think. For example today we get daily "my car uses oil" thread. And oil consumption today seems to be a real issue with most every manufacturer though...
  18. C

    Cold flow here is overrated

    Originally Posted By: OVERKILL Originally Posted By: turtlevette Originally Posted By: OVERKILL He plugs in the truck so it doesn't matter anyways. I touched on this either earlier in this thread or another. Anything will work fine of it is pre-heated, LOL! I've always wondered how much...
  19. C

    New to air compressors - hose suggestions

    I've got roughly 10000 feet of hose for work. The polyurethane ones are the best,regardless of name brand. Old school rubber is fine in a shop where it not going to get caught up but onsite they suck. If running any impact tools a 3/8 I/D is what you want. Moves more volume of air faster. If...
  20. C

    Confused between PP & PUP

    Originally Posted By: Benito Originally Posted By: Clevy We get shafted up here. When I lived in Detroit I was absolutely flabbergasted at the price differences on everything. From car parts to milk the difference was unreal. Car parts were roughly half what we typically pay here. Milk iirc was...
Back
Top Bottom