Search results

And it was easily accessible.............Ž

Looks familiar...Ž...Ž

So is my 2016 1.5 Ecoboost Fusion. Regularly get 35 mpg on highway and really like the vehicle but I am partial to sedans...

Does your receiver have an optical input?. You should be able to output sound from your TV into the receiver via optical... I don't have a source for a sound bar....

I agree that the spray insulation is not worth the expense and using the batts-as high as they will go. I had 8 ft strips and changed to light sockets and put 1 LED bulb in each. Not satisfactory so put the multi socket dudes in and like it better, but agree that the strips probably give better...

Cherry, peach, and apple in that order....

The toilet brush attachment works well in corners, in addition to cleaning the toilet.... I used the large brush attachment to clean the car floor mats and it works well. It does tend to sling around the cleaning solution........

The 2 factory batteries for my 12V Porter cable cordless drill are dying. Looks like there are a number of replacements on Amazon by companies with which I am not familiar: Shentec; Joiry; Poweraxis; Reexbon; Powergiant. These are all less than 50% of the cost of the Porter Cable brand...

Flashlights Pocket knife Gift card for Lowe's/Home depot/restaurant/doughnuts/coffee Drill bits Car wash soap/cloths/detailing products Outdoor type extension cords Bluetooth speaker for garage Wireless phone charger Work pants e.g. Carhart or Duluth.. Water hose and/or sprayer Headlight type...

A rubber mallet to tap on the cheater bar works well. I used to use a hammer but find that the rubber mallet works much better...

Contractor here - absolutely use the footings. We use drill/epoxy anchor bolts on commercial projects. An example is Hilti "HIT HY-200". There are other manufacturers. You mentioned epoxy so sounds like you are familiar with them. I would not use expansion anchors. Pour the footing (I would...

Commercial contractor here. Use 3000. I'm guessing the cost difference to be on the order of $2 to $5 per yard.

I bought a 9 mm barrel for a glock 27 and have not looked back. Glock is not my favorite pistol but I must admit that changeover was a breeze. Would recommend for anyone considering doing this.

007 I'm curious as to how long it lasted. In the HOT Alabama sun, un-garaged, I get about 2 months with 845....

My first car was a used 1974 X1/9. Learned a lot....replaced transaxle, head gasket, clutch, choke cable, rear hub, points plugs, condenser, ignition coil, distributor, timing belt, drive belt, exhaust (Ansa headers..sounded like a motor boat). 1300 cc of pollution controlled madness. Ironic...

My recent personal experience with 845 was it lasts 2 months on an ungaraged car in the HOT Alabama summer. Easy to apply and pleased with results.. I applied Mothers cleaner wax over the weekend....curious to see how it lasts. Cherry odor is a nice touch... I'm also curious to see if Finish...

Perhaps an additional downspout....

You're welcome. I enjoy your posts in the Detail/Wax forum...Ž...Ž..

Commercial contractor here. The mastic was a jimmy rigged attempt to fix an issue. Pipe boot is reasonable answer. Agree that typical life is 10 years. Photo G is the biggest concern. That designer should be hung for creating such a ridiculous condition. My view is to remove those tiles and...

That style of floor shifter is what dates it for me.....