Search results

I wonder what the deal on this beauty is.

Alt h then a, version 39 here.

Radians Custom Fit plugs.

300ml, ½ in the beginning and ½ about 6K miles in.

Oil since we got the car has been Pennzoil Platinum either 5W20 or 0W20. Her commute changed from 1 mile local + 7 miles interstate (65 mph limit) + 4 miles state highway (50 mph limit) to 9 miles of 35 mph local roads.

Wife's car, her daily commute changed from a 13 mile highway run to a 9½ mile local street trip. Time oil in service went up. Dipstick showed right at the add line when I did the change. I'm going to watch a little more closely to see if it needs any this run.

We use the green at work since our recycler allegedly checks our waste oil for chlorinated solvents.

Gummi Pflege Stift This was highly recommended to me so I bought some and am going to use it soon.

I like Fuji apples. Costco = 1.07 per lb Shop Rite = 1.69 per lb Gas is cheaper than almost everyone around here. Plus Costco is a customer of mine so I like to return the favor.

Originally Posted By: Dyusik Oe caddy deville is my favorite. Sounds like a freight train. The Cadillacs had a diminished 7th chord with 4 horns, the mid-priced cars had 3, and the cheapest had 2.

Originally Posted By: Lubener Also some late model Chryslers, you have to remove the left front tire and the plastic inner fender panel to remove the battery. First and second gen Sebring / Cirrus / Stratus / Breeze. I've owned a couple and can actually do it by turning the wheels all the way...

There is still one local cider mill where they have unpasteurized cider. One of my favorite drinks. It tastes like a bite from an apple.

Common problem on Sebring convertibles. They use a spade terminal and the wires were routed badly; there's a TSB on how to reroute the wires. I have soldered mine back on. I tinned the tab well, held it with long needlenose pliers, pressed it to the glass with my soldering gun and as soon as the...

Let's not forget the eggbeater.

Well on the 2.7 in my Sebring to change the knock sensor the instructions read as follows- (1) Remove intake manifold plenum refer to the Engine section. (2) 2.7L Remove the passenger side cylinder head, refer to the Engine section. (3) Disconnect electrical connector from knock sensor (Fig. 12)...

My local grocery store has a smart phone app linked to its discount card. I walk in, launch the app on my phone, scan and bag my items, go to a special checkout, scan a code on that checkout which uploads my order to pay. They do an occasional check of what I've bought. They caught that I...

Still looking good. I think I pushed it as far as it could go without adding any make up oil. It was still ½ way up the dipstick. Code: Miles on oil 10,407 6,025 4,544 Universal Miles on unit 93,415 83,008 76,983 Averages Sample date...

Originally Posted By: tc1446 Sorry, I don't know the answer, but am curious what requires grease on a Yamaha? This might help others in answering your question. ATV transmission.

Had a Heathkit my dad built when I was a lad. First one in the neighborhood. People were amazed at boiling a cup of water in a minute. Microwave bacon was my favorite afterschool snack.

Originally Posted By: The_Eric Why not just replace it, or at least scrape it off and use a quality RTV? How did the bearings look? Gasket is a molded little strip of silicone. I'd have to pull the engine to change it. Didn't get a look at the bearings either; first rod I tried to take the...