Search results

  1. M

    Need oil type for 725EXi Pressure washer engine please

    Looking for oil type for the B&S 725EXi 'never change' engine. I'm changing it. Need the type and maybe capacity too. thanks
  2. M

    Coleman 196cc mini bike break-in oil?

    Needing a recommendation for a break in oil for a Coleman/tao Tao 196cc mini bike. Calls for 10w30.
  3. M

    How much Techron concentrate/Regane for a motorcycle that has sat a lot? (Just bought used)

    Recently bought a 2018 Honda CB500f fuel injected parallel twin. It has 1300 miles and owner left it sitting a lot with fuel. Never used anything but 87 gas from wherever was cheapest Seems to run well but wouldn’t mind trying an additive just to see if there is anything hiding. Techron...
  4. M

    DOT3 or DOT 4 Brake Fluid ?

    I just changed my 2014 F-150 and glad I read the manual first...
  5. M

    2018 Subaru Outback: DOT 3 or 4?

    Going to do a brake fluid flush on my 2018 Outback. I am trying to determine if I have 3 or 4 in there from the factory. The manual says 3 or 4. Whatever is in there I'd prefer to stay with - thoughts? Also as a side question; anyone ever bled the ABS module on a late model Subaru?
  6. M

    When did they change the FL500-S?

    Doesn't say made in USA on it and my oil filter cap can't get traction since they went to a lot of flats instead of numerous little ridges. Almost thought I got counterfeit.
  7. M

    Just got a Daytona 3 ton from HF. Needs oil out of the box?

    I guess if my car runs and drives I don't need to check the oil following that thought? lol
  8. M

    Just got a Daytona 3 ton from HF. Needs oil out of the box?

    Mine says to the top of the piston.
  9. M

    Just got a Daytona 3 ton from HF. Needs oil out of the box?

    yes I read the directions - how else would I know how to get into it and that I needed to check the level?
  10. M

    Just got a Daytona 3 ton from HF. Needs oil out of the box?

    all they have is the bottle of bars leaks stop leak oil.
  11. M

    Just got a Daytona 3 ton from HF. Needs oil out of the box?

    Just got this nice new jack and it says to remove a screw to bleed the oil and check oil level. Well I see no oil in the holding area. So HF is 25 miles one way - all I can find at walmart is a bars leaks jack oil with stop leak. This is a new jack so I don't know if I should go putting that in...
  12. M

    The tale of gas cans continues

    I actually just pulled mine out after not realizing what would happen at the pump with a full force nozzle all the way down in the nect=k. Now I need to wash my shoes.
  13. M

    The tale of gas cans continues

    Do you rip out the FMD mesh inside the neck? I don't appreciate having to fill at half-speed or slower. Also I'm used to putting the nozzle down into the can not hover it just inside the neck.
  14. M

    Coleman ct200u running rich with rough idle through handlebars

    I took a dremel to my throttle stop screw on my BT200X Then put a ziptie on the governor spring to limit it. Different machine.
  15. M

    where in the USofA can you buy a Tokyo Roki filter

    I get them at my local Subie dealer. If you are talking about the black filter..
Back
Top