Search results

Yes, from Canadian Tire store at St. Albert.

This the MotorMaster 10W-30 Diesel oil.

This engine has never had any work on it and I do all the servicing including oil changes. I phoned Metro Tech Systems in Calgary about the moly as there is none in the virgin sample...they could not tell me where it is comming from. They did say their testing is done in accordance with ASTM...

Yes, this is Motormaster diesel oil, purchased at Cdn Tire last year. I never noticed the "SH" until now. No engine work, I am light footed, and will not be attempting any more extended oil changes. The silicon level is disappointing to me.

Done by Metro Tech in Calgary, Alberta. Motor Master 10W-30 CH4, CF/SH Copper 0.2 Aluminum 1 Silicon 7 Iron 2 Chromium 0.3 Zinc 1,250 Magnesium 275 Calcium 3,000 Phosphorus 1,150 Boron 216 Vis @ 100 11.57

Here is my second UOA on this vehicle. The first number is the used oil, the second is the virgin sample. I am at at a loss to understand why my silicon is so high. My first UOA had 42ppm for 6,100 miles and this one is 34ppm in only 2,628 miles. The virgin sample has 7ppm silicon. All...

I have a 1998 Crown Vic with the 4.6 and approximately 51,000 miles on it. I have changed the transmission fluid twice and one gas filter. No other service work except oil canges. It still has the original brake pads which I will check for wear this spring. A great highway car and lots of...

Yes, Edmonton, Alberta. I am retired and the car is used for short trips within the city. Considering the car was used through all four seasons, perhaps the UOA isn't that bad.

Never heard of them. Will use them for my next analysis. At this oil change I put in Mobil 1 and an Amsoil air filter to see if any differences show up. Thanks.

The car has had excellent maintenance in the past, oil changes every 3,000 to 5,000 miles and synthetic oil. My next run is Mobil 1 synthetic, a Super Tech oil filter and an Amsoil air filter. I will do oil analysis at about 5000 miles to see if there will be any difference. I will check for...

52,807 miles on vehicle, 6100 miles on this oil (Oct/04 - Dec/05). This oil is combination of M0304 and M02. Maybe that explains why the used oil sample has higher additives than the virgin sample wich is M0304. I am now out of M02 and could not get any analyzed. The oil filter is a Ford Long...

Analyzed yesterday by Metro Tech Systems in Calgary, Alberta: German Castrol 0-30 Batch M0304 Aluminum 1 Silicon 3 Iron 3 Zinc 880 Magnesium 132 Sodium 7 Calcium 2450 Phosphorus 814 Molybdenum 1 Boron 2 Viscosity 12.00

Only one product used, I believe it may have been a Valvoline Fuel System Cleaner. No other additives were used. No leaded gas used.

I changed the oil and will start with a new oil again on July 1. I can continue with GC or I have some Shell Rotell SB -pao synthetic but this is a 0w-40 oil and I may lose some mileage.

Original engine. The car previously belonged to my Aunt who lived in Kelowna, British Columbia. Due to her health the car was seldom used. I received the car two years ago with 30,000 miles on it. I use it as my "running around car".

Here is a an analysis that covers that covers 9 months including an entire Alberta winter - Oct 4/04 to June 1/05. Vehicle: 1984 Toyota Cressida Engine: 5MGE 168 cu inch, in line 6 cyl, double overhead cam Oil: GC 0w-30 batch M0233868784A1 1512 Makeup oil: Nil Miles on oil...

I have been using Amsoil transmisson fluid (complete fluid change) for the last 2 years and in Edmonton it is not uncommon to get to -35 Celsius. The transmission in my 98 Crown Victoria preforms flawlessly.

This is my first posting, please bear with me. A big thanks to Patman and other contributors that helped me overcome my oil consumption problem, one liter to 800 - 1,000 miles since the vehicle was new. I switched to 4 litres of Mobil 1 5-30 and liter 15-50. Consumption is now normal. I was...