Search results

Who was talking about science ? If you are witnessing metal particals in the oil or oil gelling, do you really need a methodological approach to understand something wrong with the engine in the former case or with the oil in the latter case ? ;) As for relevancy, it seems that you have missed...

Hi BITOGers, I would like to bring back the discussion on results of this garage test, namely, so called "frying". During our earlier disussion some members were expressing doubts on relevance of the test to the real life performance because of too high temperature. Indeed, 400 С is too high...

You are right, but you are like one among S&P100 and I am among S&P1000. 😁 Feel the difference! 😆

Hi Quattro Pete, I am really pleased to see that one of the first BITOGER's is stilll active. I was always enjoyed your posts. Thank you a lot. The only Mobil1 FS 5W-40 which has MB 229.5 approval is FS 5W-40: https://bevo.mercedes-benz.com/bevolisten/229.5_en.html If to be based on relatively...

European M1 oils like 0W-40, 5W-40 and 5W-30 meeting ACEA A3/B4 spec have quite high nitrogen content (about 50% more than its ACEA A5/B5 oils) and I would trust SonofJoe who was right claiming that some part of boron comes from boric acid to offset negative impact of nitrogen on Viton.

If to be based solely on VOAs, viscosimetry and base oils specified in MSDSs, Mobil1 FS x2 5W-40 is fully dentical to Mobil1 FS 5W-40, but there are rumors that x2 contains a zirconium based friction modifier and it has really good resistance to cavitation among 5W-40 ACEA A3/B3/B4 oils.

Today, if to apply the formula with suggested coefficient 0.917, it would be 5%. I would start with QSUD/QSFS 10W-30 and if oil consumtion increases, I would try M1 FS X2 5W-40, or M1 5W-40 TDT or Formula M 5W-40.

Hi, thank you. Then the drop in both viscosities is either caused by fuel (despite UOA did not show it), or the engine is tough on oil. As for Titanium, it seems at time of your purchase it was not simply added to Triton ECT. Have a great week-end !

Thank you for your clarification. In this case I may only guess why about 100 ppm of Titanium are missing. Another issue is a huge drop in both viscosities: according to PDS [email protected] should be about 96 cSt and [email protected] - about 14.5 cSt. Before 2017 they specified respectively 95 and 15.1. Fuel...

Maybe yes, maybe no ;) Оn the one hand, since 2017 SDS says "less than 15%" (it was 37% in 2016 and less than 37% in 2014), but from the other hand, as I undertand, not all PAO need to be listed. Given unchanged typical properties specified in PDS, there is still a hope that PAO content may be...

Would you clarify what make you believe that it has a significant shot of PAO ? If it's so, it would be great, but I am afraid this was in the past and they changed the formulation in 2017.

Thanks a lot for the report. Right time because I am chosing what to use for coming oil change and its counterpart from Kendall (SHP 5W-40) was on my list. Just one issue with the report: according to PDS it should contain 100 ppm of Titanium. They removed Titanium from PCMOs, but PDSs of HDEO...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted by y_p_w</div><div class="ubbcode-body">I wonder how they compare to the American versions..</div></div> Believe Honda 15400-PH1-F03 from Purflux had more or less similar performance comparatively to Honda 15400-PR3-004/014...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted by SlavaB</div><div class="ubbcode-body">those honda's filters are rusty</div></div> No, they are not. At least by visual inspection of inner side of filters this does not look like a rust. The tapping plate of Honda F03...

1. FRAM FPS3593A 2. Honda 15400-RBA-F01 3. Honda 15400-PH1-F03

Some weight comparison: 1. Honda 15400-PH1-F03 2. FRAM FPS3593A 3. Honda 15400-RBA-F01

And the last victim of actual evaluation: FRAM FPS3593A

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted by rubberchicken</div><div class="ubbcode-body">Is it hard to get parts mailed to you from Western Europe or North America ? I personally would like to read of your experience getting parts from other countries...

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted by parshisa</div><div class="ubbcode-body">That ain't salo, this is mylo. Next time post some nice podcherevock. Haha, just messing with you. Batkivshiny pryvit!</div></div> Obov'yazkovo, druzhe ! I understand you are...

Honda 15400-RBA-F01 cut open. Later I will try to evaluate these two Purflux filters and report difference.