Search results

  1. C

    Aircraft Tempest 48108-2

    Tempest was slightly less expensive and has the internal magnet. Although I read somewhere that the magnet may not be included in the future; apparently there is a shortage of magnets.
  2. C

    Aircraft Tempest 48108-2

    Mooney 231 28 Hours on this filter, approximately 1100 hrs SMOH. Oil in/out Aeroshell w100. Same filter installed. A minor amount of debris in filter, no shiny stuff, magnet has little scum on it, as usuall. Enjoy.
  3. C

    Mopar mo-285

    From a 2015 6.7 cummins Ram 2500 160k miles on truck. I was asked to perform oil change on truck and did so; while resetting the oil life moniter on dash the indicator said it was reset 2100 miles ago... New tires and brakes were installed 2100 miles ago, but no oil change on the invoice or...
  4. C

    Napa Gold 1358 Cut & Post

    Off a Fisher Panda generator w/ a Kubota Diesel. I'm not sure of hours but I'm guessing around 50 on filter, Oil was probably T4 15w-40. Refilled Genset with T4 and added a Kubota brand filter, Probably a denso made in China.
  5. C

    Anyone using their CarQuest oil stash?

    CQ 15w-40 in the 6.7 Cummins now. It was like $10 for a 2.5G jug. Seems to run great.
  6. C

    Looking for the best UV protection Wax/Sealant.

    I have several boats, cars and an aircraft under my care. I have been using some retail waxes such as meguiars 50, Shurhold pro polish, meguiars gold paste, 303 on rubber and soft goods. These product seem ok, but I would like to hear what you guys think is the best of the best, primary concern...
  7. C

    FREE Oil Sampling/Analysis Kit From Chevron

    Has anyone actually received one if these test kits? I submitted a request for one about 3 months ago and it never showed up.
  8. C

    53' Stude's VOA - Carquest 15w-40

    Thanks for posting this, I picked up several gallons from the AAP sale and going to use this in some Yanmar & Cummins boat diesels.
  9. C

    HDEO Shortage - Walmart Shelves nearly empty....

    My $4 a gallon stash is now working nicely!
  10. C

    2021 6.7 Cummins HO cut OEM

    I rest filter in the hole, then use a disposable glove to stretch over the base plate. Never spilled a drop. There is also that temporary threaded cap..
  11. C

    Post Your Latest Coolant Change.

    2014 F-150 3.5 Ecoboost 94,000 miles drained factory fill, flushed with 6 gallons of R/O water. Then added a 1.5 gallons of Carquest Dexclone Concetrate.
  12. C

    Carquest R84502

    I believe it’s a nitrile valve. My truck has startup rattle, sometimes it won’t rattle even after sitting for 2 weeks with old oil. Sometimes it rattles with fresh oil and the Fl500s. It has been very random, truck lives in south FL so no really cold starts, just seems to do more with the...
  13. C

    Carquest R84502

    Off a 2014 F150 3.5l ecoboost 94,200 miles 4,200 miles on filter, Mobil Super synthetic 10w-30. No tears noticed, adbv held oil in can. Replaced with a carquest blue 84502 & Mobil Super synthetic 10w-30. These filters work fine for me, usually a 5k OCI, I've noticed less startup rattle...
  14. C

    Virgin Purolator L14460 Cut

    Y Yeah it's probably fine, I'll also add that this one was by far the easiest filter I've ever cut, one step up from a Budweiser can!
  15. C

    Virgin Purolator L14460 Cut

    A Freebie unsold filter from the parts store. This filter is not equipped with an ADBV. looks like the metal end caps disagreed with the press, also seal gasket is too thin IMO.
  16. C

    Diff fluid

    I’ve used Valvoline 75w-90 and 22lbs. on diff cover filled a knuckle below fill Hole. truck runs fine towing about 10,000lbs a few times a year. With his heavy towing I recommend a brake fluid flush and bleed; 2 quarts of dot3 should do it. Also a good trick to oil filter removal is to stretch...
  17. C

    Brief Sun N Fun 2021 review

    Going today
  18. C

    Do trains and planes need wheel alignments and wheel balancing?

    I’ve changed some GA aircraft tires, there is usually an orange or yelllow mark indicating the light spot, line up the valve stem to that position just as roofless says.
Top