It’s the Woman’s fault for buying the property in the first place! If Werner trucking can be sued for getting hit head on by an out of control driver crossing the centerline, then this is inline with the new “Liability” line of thought:)
AMOCO Ultimate Synthetic 20W-50. Good stuff! You could use it in almost everything. Cars,Trucks,Motorcycles, etc. Especially Motorcycles. It didn’t have the “WET” clutch issues other synthetics had at time. It was only available here in Texas at Target stores. At least that was only place I...
Be careful. My post about this entirely Hyundai built ship was deleted. I guess it is still OK to hammer Boeing, Chrysler, Ford, etc. all the time though.
On the "GM" vehicles I've owned particularly pickups, they have always made a "whirring" noise when in operation. The original GM pumps went well over 200,000 plus before they quit. Now the aftermarket ones that I have bought that's a different story. They can be hit or miss in longevity sometimes.
Here are some exhaust “repairs” using mild steel sheet metal and sheet metal screws from Home Depot. Make sure you use High Temperature sealant if you try this repair route.
The lower hinges-spring mechanism could have been completely missing and the door would probably never open even under pressurization. Any problems with the two upper fittings and bolts and the door is going bye-bye! This design is really not a “plug” door.
I owned a 1987 Mazda B2000 that had TWO "alignment" screws on the rear brake drums. This one shop I took it to for new tires did a "FREE" brake inspection and didn't reinstall those screws. My rear brakes started "clanking" making all sorts of noises. Only reinstalling those screws made the...
Maybe wrong oil viscosity was put in? I once accidently put 4 Quarts of FRAM 5W-20 instead of FRAM 5W-30 into my GMC Canyon during an oil change. When the weather got hot, I started getting a Low Oil Pressure warning at idle. Somehow by changing the oil filter(different brand) it stopped. I...
I own an 2014 EBR 1190RX that has that same ROTAX engine. These engines have a common sump for engine oil and the transmission. They are not like Harley! My EBR developed a notchy shifting condition because the slave cylinder was leaking. This bike also had the heaviest clutch lever pull of any...