Recent content by Z7What

Thanks Fellas! Y’all were a big help! Got the oil changed and the carb rebuilt and adjusted and she is running like a brand new bike. Hard to believe this thing is 32+ years old!! Wayne

I have no problem putting Honda oil in it, I just didn’t know if it was the correct oil. I appreciate all the help fellas. To clarify is Rotella 15W40 the same as Rotella T4 15W40 or is it two different types of oil? Wayne

My Honda requires a oil for wet clutches but this bike doesn’t state anything about that. I don’t mind using a JASO MA but if I was to use a 10W40 can I use API SP in place of API SE/SF? Wayne

I recently purchased a Yamaha Moto 4 Champ 100cc 4wheeler for my son. I’m not exactly sure what year it is but it’s between 87-91. The service manual shows many different types and weights of oil can be used. I planned to run 10W40 but the API ratings is what’s confusing me. It says API SE or...

Anybody else have any info or reviews on the Dupont grease? I bought it already but I'm having second thoughts on if I should use it or not because I can't find any reviews. Should I just go with the Lucas Marine grease I can get at Advance Auto? Wayne

Yes the Yamalube I bought last year, the Merc I bought yesterday. Curious how a oil can be both 80W90 & SAE 90. I'll admit I know little about oil, but didn't think that a oil could be two different weights. Since the Yamalube is labeled 80W90 & SAE 90 and the Mercury is only labeled SAE 90...

I have a 1998 Mariner 40HP. Over the last 5 years of ownership I have been using Yamalube Gear Oil like the one pictures on the left. Today I went to the same boat dealer I always go to that told me the Yamalube oil is what I need. And told them I need lower unit oil. Told them what I had and...

Originally Posted By: Donald I hope you are removing the bearings for a visual inspection rather than just pumping grease in via bearing buddies. You will need new outer grease seals and cotter pins. You want to remove each bearing, wipe off the grease and visually inspect each of the rollers on...

Any other info on this grease? I got it in and about ready to start pulling everything apart, cleaning, greasing and putting it back together. Just worried it not the best, I can't find a single review about it other than on bicycle forums which is having me double guess my purchase. Wayne

There is a big issue with the Eco shuttering and misfiring due to what some people think is caused by the PCV systems. The only issue I have heard about the 5.0L is a little rough idle. This was due to spark plug gaps not being set correctly from Ford. It was really only a issue with the 11-12s...

My 2013 F-150 5.0L has never had this issue and it's got 22K miles. Wayne

theretrofitsource.com Wayne

I have one with a PenTax 4-16X50MM and its pretty [censored] accurate. Has killed dozens of Lapin! When hunting I only use CCI MiniMags 40gr! Wayne

I have a G22 and currently have around 5700 rounds through it, never a jam or any issues at all. I have mostly put Winchester Bulk White Boxes and Remington UMC through it but wouldn't worry about putting anything else in it. Wayne

Thank you for you post, the length of the post doesn't matter to me as long as it's helpful which it is. Today I received in the mail my order Bearing Buddy's Model# 1980 with New Covers, and Dupont Tuflon Marine Waterproof Grease I have listed above. Plan to use this grease on the wheel...