Recent content by tstewart

Using Evans in standard motors does not make sense to me. It has certain advantages in racing applications. I use it in my Buell 1125R road race motorcycle. The bike does not have radiator fans as it relies on ram air while on the track. The problem I have is overheating when riding up or if...

Originally Posted By: SavagePatch Highlighted in yellow is what I assume is the same oil, just different quantities. It appears that it isn't synthetic since under Product where I highlighted in Red you can see that they clearly state when an oil is synthetic. I found the same document...

Originally Posted By: DdDd Why would anyone pay for dealer service outside of warranty work?! For sure you overpaid for what you're getting. The subbing of regular for synthetic is just the tip of the iceberg. At least that's been my experience. Simple service work gets done sloppy if at all...

The maintenance package that I purchased from the dealer includes 10 synthetic oil changes, 10 tire rotations / balances and fluid verifications, and 5 wheel alignments. During my first oil change, the dealer used RAM part # 68218941AC oil. The little I have been able to find regarding the RAM...

Stopped in my local Auto Zone and found 12 bottles of GC 0W-30. Ben hearing good things so I will try it on the next change. All of the bottles that they had in stock had "Made In Germany" on the back of the bottles. Is all 0W-30 made in Germany or is some made in the USA?

Ralph, You mentioned that your Camry does not have a FF Filter. How did you remove it? I would be interested in removing my FF Filter since it really does not do anything anyway since installing the bypass. I would like to have the extra oil pressure that can be gained by removing the FF.

I just completed installation of a Motor Guard (supplied by Ralph) on my 2001 6 cylinder Jimmy SUV. I have had no problems with operation of the filter. I drive the vehicle approximately 50 miles per day mostly on the expressway. I use M1 5W30 motor oil and a WIX full flow filter. I want to...

I just completed installation of a Motor Guard (supplied by Ralph) on my 2001 Jimmy SUV . I used a TD Performance Products Sandwich adapter and drilled a 1/8" diameter bypass orifice in the adapter. The adapter does have a built in relief valve. Additionally, Ralph drilled a 1/8" diameter bypass...