Recent content by tomm22

I have bought an MTD SN 155 H Hydro D03846, model number 12BA518N670 secondhand with a few things broken and a few things missing( i find out after) also has a 17.5 HP Proffesional Series B&S engine model 31L777 3136 G5 110901ZD im looking for any parts breakdowns and owners/service manuals i...

thanks got parts yesterday and had it all together charged battery and started up great. when spun over by hand there's a slight click noise on im guessing the intake stroke. im thinking its the when the cam lobe hits the cam leaver for the pushrod. when runnign you can only pick it if your...

found the more indepth service manual didnt realise i only had a basic one. swapped cam gears over for the broken piece need a spring and i should be set. then get some gaskets and put this thing back together and hopefully all is good next Q oil... what oil should i use? i have seen it...

cleaned the carbon off the head and valves they all looked good so re assembled them and put a bit of wd40 around them and does not appear to seep through so valves are in good condition I have taken the cover plate off and appears the tab on the exhaust cam gear has broken off that the ACR...

ripped the head off valves and pushrods look fine.

Sorry I forgot to mention I was spinning it over by hand with the spark plug out so no compression. And it was halfway through the intake stroke when it was getting harder to spin. Its only 1 cylinder and yes TDC on compression stroke. My issue im chasing ATM the missing and slight noise I...

Hi, I had some trouble starting my Kohler courage 15 engine. i figured it was valves or the ACR so pulled valve cover off and adjusted the valves, one was quite loose. after adjusting i didn't have a torque wrench that went low enough for the torx grub screw so i done it by hand and must of...