Recent content by speedy341

Over my riding career I've used (in chronological order) Golden Spectro Yamalube Duralube Maxma super M back to Yamalube and now Mobil 1 MX2T I can't help but feel like I'm cheating my bike by not giving it premix from the $tealer. I know the Mobil is good stuff and it's a real treat to...

I was looking at these earlier this year. http://cgi.ebay.com/CAP-OZN-1-Ozone-Generator-Odor-Control-Hydroponics-HPS_W0QQitemZ7762211804QQcategoryZ3186QQssPageNameZWDVWQQrdZ1QQcmdZViewItem I found out (through BITOG) that much ozone isn't good for your health, so I passed. It would probably do...

I rode my dirt bike for the first time in 6 years last weekend ('95 KTM 250SX). I replaced the fuel, gearbox oil and cleaned and oiled the air filter. Now, that rusty crank thread has me worrying. I didn't do anything to it other than turn the fuel petcock off before I 'stored' it. I bought the...

Would it be possible to make a homemade pressurized brake bleeder by... Taking an old master cylinder cap, drilling a hole in it, use an air tight fitting and attaching a hose to it, and attach that to a pressurized bottle held upside down full of brake fluid, the cracking the bleed screw...

No, no, no. You got it all wrong. You gotta fill the windshield washer reservoir with fuel, rig the end of the hose to the top of the carb or into the fuel rail, and squirt fuel in via the wash button. When she starts to sputter, wash the windshield again.

I have this... http://www.longacreracing.com/catalog/item.asp?id=1043&catid=17 I used it three times and never used it again. I'll sell it to you for $35.

I went camping last weekend and ended up sleeping in my truck. The engine idled all night. There also was Iso Heat in the gasoline. Would the extended idling cause significant oil dilution? I changed the oil (with 1500 miles on it) just to be safe (and ahhh well, because I'm a BITOGer).

I found it. I was looking for Allison C4 and Cat TO-2 & TO-4 specs.

I've used Bel-Ray waterproof for the last 20 years. ...and yes, every off-road bike should be tore down and (re) greased before riding it.

I'm buying the last year CR250R made. I hear it's this year, but I'm going to wait until the '07's come out to make sure. I'll be using 15w40 HDMO and MX2T.

I have a MAkita 4 1/2" grinder that makes a lot of bearing noise around the head. Is it possible to lube this, and if so, with what?

I had to do a search... http://www.sonicblade.com/

I used 2 copper washers because the threads stuck up too far in the oil pan without them. No leaks in 40,000+ miles.

What would you use if you hand waxed your vehicle once a year? I don't really care about shine as much as durability, and it has to be readably available at a local store.

Is one type of alcohol (methyl vs. isopropyl) better in this application?