It's not uncommon for the repairs needed to be more than the customer wants to spend so they ditch the car with you. In California we can charge storage if the customer has left the car more than 3 days after you tell them to pick it up. After 30 days you can file a mechanics lien and then after...
Originally Posted By: GiveMeAVowel
Really while independent shops might not be the disaster that chain shops are, they aren't anything to write home about either, many of these are just as incompetent, and just as crooked too, the same can be said of dealers, except that you do have some...
As someone who has been in the business for 30 years and specializes in old cars, this is incorrect. The grease should only be used on the boot to help seal out moisture and prevent sticking. Dielectric grease is non-conductive and I have seen it cause misfires many times when it is slobbed onto...
If they are going to make it illegal to work on your own car they are going to need to make it so you have to have a license to work on them. I wonder how many mechanics would fail.
Time will kill a car faster than any amount of mileage will. Not driving it is actually a disservice.
I deal with this on a daily basis because my company sells low mileage classic cars.
Originally Posted By: Shannow
Originally Posted By: turtlevette
It took huge ones to make that turbine repair and take responsibility to say fire it up! I know how conservative the power industry is and people with the knowledge and confidence to keep the lights on are few and far between. Kudos...
I like your honesty. I work exclusively on old cars so I see a lot of repairs like this. It's not the right way to do it, and I don't think you'll get more than 1000 miles, but if it works, it works.
When it fails, please post pictures.
That is a 356 'Carrera 2' with the four-cam engine in front of the 959. There is another 356 parked backwards that is a super 90 and at the far end is a 356 with a 911 engine in it.
Originally Posted By: SumpChump
Originally Posted By: KrisZ
... and don't forget that cheapie HF torque wrench. Nothing makes you feel more like a pro than that satisfying click. You can then pat yourself on the back for a job well done, not like those "other hacks".
Actually it just makes me...
Torquing every single nut and bolt is neither practical or the right way to do it. The ability to judge whether a fastened assembly is properly tightened depends on mechanical aptitude and experience. The key term here is 'properly tightened'. All fasteners should be properly tightened, but not...
Torque them once roughly to the factory spec and don't worry about it again. They're not going to break and they will probably outlast the engine as long as you use a little lube and don't cross-thread them. Then again, this is BITOG. Did you confirm the torque wrench was exactly 90 degrees to...