Recent content by pkunk

Actually, O2 is not flammable. It will make a flammable item burn better however.

I tried to go through in a 16 foot fisher with a 25hp outboard at tide change. The current was so strong I had to tie off and wait until it was going in my direction. 1959

I fed mine in the garage, installed a kitty door so they had a safe haven. vermin non existant now

I had to have a Glock-so I built one. Then I decided that 22lr would be cool and added a green laser

So far, with the new meter, daily usage readings are low & normal. There must have been something wonky with the old meter but they won't admit it.

This pic is the mfg replacement for the run cap. I ordered this-Run Capacitor CBB60 450VAC 450V AC 60uF 60 uF 60MFD , 50/60Hz

Here's a possible replacement start cap.

That second one is the start cap. It was suggested that I replace it. That pic is from the mfg website as their replacement. I ordered the correct run cap already.

The mfg website has a replacement one but says it's 600mfd 125V. It's a 240v machine. I see lots of 600mfd caps that will fit. I guess 125V is OK? Mfg pic

The hole in that one let all the juice out-no worries.

I blew the run capacitor in my 3hp Dust collector today. It was running fine earlier but just groaned and popped the breaker. What can cause this? Should I replace the start capacitor too? Mfg wants $36 plus $10 shipping but I found one online for $13 delivered.

Currently AMEX has a deal with select small businesses - spend $10 get a $5 credit - up to 10 times. That IS free money!

Turns out it was the cable. I kept hearing that if you have 5v at the antenna side the cable is good. Not so. Replaced with new and all is well.

I finally replaced the preamp-twice- and the 300-75ohm converter. Still no signal. I have 5v at the end of the RG6 going into the preamp, but something must be bad in the RG6. It's next on the list

Well, they came and gave me a new 'smart meter'.. Jury's out.