Recent content by Nukster96

Please do! I mainly wanted to put my own experience with Valvoline Restore and Protect out there, and it’s good to know I’m not alone in seeing this strange consumption issue. Sharing real-world experiences gives people better information to work with before making the switch, not to scare...

Exactly! Maybe its just a Honda thing? cus my Accord behaves the same way

When you check the oil, make sure the car is on flat ground. Even a small incline can throw off the dipstick reading on some cars. Also let the car sit for a bit before checking so the oil has time to drain back into the pan. In my experience 5 minutes is not enough time. I usually check mine...

I 100% agree as well. I think Valvoline Restore and Protect removed that layer of varnish and now the gaskets are starting to seep a little. I already replaced one because the seep was on the verge of turning into a leak. The best solution is probably to replace all the seals and gaskets but I...

I appreciate your input and advice! Just wanted to clarify, did the element start burning oil after you switched to Valvoline Restore and Protect?

Let’s not turn this into broad statements about people’s IQ and literacy rates. There’s no need for that. None of us here are running for office (at least I hope not), so there’s no need to put anyone down. As the kids say these days "it ain't that deep!". The main reason I’m looking at a...

I would agree if not for the fact that there was zero oil consumption prior to using Valvoline Restore and Protect. This would be my 4th OCI.

Hello everyone, Quick update: I checked the oil again at 4,000 miles and it’s down about 0.5 qt. The engine is still burning oil, but at a much slower rate than before, it used to burn about 0.5 qt every 1,000 miles. What’s a bit strange is that at this rate, I would have expected to see at...

The car stopped burning oil after 3.5 OCIs

You may be right...or I may be right? At the end of the day, we are all speculating here and I think the pros need to do some actual testing. Because I know for a fact that my engine wasn't burning oil before, but started burning with Valvoline Restore and Protect and then stopped again. There's...

Amen!

I think the company should do more testing to investigate the temporary oil consumption issue. Yours might resolve itself with another OCI but its hard to tell. It took almost 4 OCI to get rid of the temporary oil consumption in my engine. Glad I'm not the only one experiencing this.

Well the issue has been fully resolved so I might run Valvoline Restore and Protect for another cycle and then switch to a High Mileage oil. Haven't decided yet.

Thanks for the suggestion, but I have already run multiple fuel system cleaners, cataclean, rislone, redline, etc. Fortunately, I've managed to "clean" the cat to a point where the code only goes off when I take long trips on the highway.

After taking the car for a spirited drive, as someone here suggested, the P0420 light came on and has been turning on and off ever since. This particular code has never come on in my vehicle prior to switching to Valvoline Restore and Protect. That’s why I brought it to a couple of shops, they...