Interesting Google cut and paste also made for Wards
The GIS prefix identifies the original equipment maker as Gilson. [1, 2]
Users on the Houzz Forum Discussion share a consensus that “the first three letters of the model number (e.g., GIS) may help identify the manufacturer of a Wizard...
This is the way, hot from the transmission to the factory cooler, out from that to your extra cooler, then back to the transmission true double-style cooling, great diagram THANKS
Extractors are so much easier but way slower; no crawling around, and you don't have to do it all at one shot. Just take your time measuring what comes out, letting the extractor and hoses drain for an hour minimum. Suggest a large graduated pitcher and an empty 5-gallon pail
5000mL (5 Liter)...
I use an extractor a lot when I want to do a partial drain and fill, and definitely with transmissions that have no drain plug, so much less mess. Get an accurate measurement of what you extract and put that amount back.
Friend used one to transfer 50 gallons of diesel from a holding tank with a hole to his tractor, truck, and 5-gallon cans he used a AC powered drill. He said it might not work with gas; the diesel took a few hours; it was not fast
What engine for the Toro you might not have had enough gas for hill? Check the tank for dirt. I had a blade of grass or small leaf in the push mower's tank that would end up blocking the outlet to the carb, causing it to stall. This made me insane until I saw something floating around in the...