Recent content by Edbergh

I erased the codes on the OBDII but the indication comes on back when you are starting the engine, then afther a few seconds it goes away. What oil is best to use . now, 10/30 or 10/40 or 15/40 for this type of weather? engine runs real smooth you don't even feel its running.

[i]greetings all, I have a 2011 jeep wrangler JK 3.8 lt , and about a month ago I changed oil and put in mineral oil 5W/30 but recently I got an indiction on the dashboard stating change oil???? should I go over to 10/30 synthetic ? I live In a very hot island enviroment 89 degrees farenheit I...

Hi all, Need some expert help here with the right "Power Steering Fluid" for my Jeep wranger JK 2011 , 3.8l . according to the manual it says MOPAR ATF+4 , what I would like to know if there is a equivalent for the Mopar ATF+4 since where I live on an island in the Caribbean I cant get this...

HI CT8, The average tempt. here on the island is around 32 degrees celcius ) ( 90 degrees farenheit )

Hi IndyFan, Thanks for all the valuable info I see you know your stuff, the engine does not consume oil sofar as I know and no leakage spotted below or on the block itself, one thing your right on the nail is the coolant, I used a over the counter allready mix brand called "RED-COOL" Anti Rust...

Hi Brocluno, I want the engine to run smooth and not to cause unessesary wear because of different oil placed in instead of what the manual prescribes, there is no clicking nor clacking on cold start with the 10w-30 already in it, no oil pressure light coming on while idling with temperatures...

Greetings, I need some help with the following, the last time a local mechanic changed the oil of my "JEEP WRANGLER JK 2011 3.8L Gasoline" , he put in SAE 10W-30 synthetic brand by CAM2 Super Pro Max, API Service SN-RC ILSAC GF-5, the Manual says to use API certified 5W-20 meeting Chrysler...