Recent content by chevy_man

Originally Posted By: Chris142 Well id get it fixed and in the mean time start looking for a full floater. Should be a full-floater already. Even if it is the 9.5" 14, it's still plenty stout. OP: did you get a pic of the shafts? Ive never seen one wear down the splines. [censored], I dont...

It will need the speedo recalibrated. It will read slow by about 10%. But, thats besides the point. Honestly, the abuse those things survive is amazing. And gear oil will work. Just make sure that if it has a G80 you don't use limited slip friction modifiers because the clutches are designed...

Eh, that's why my vehicles always get topped off once they fall below 1/2 tank. I usually find the smaller stations to be friendlier, and I can't remember the last time I had to go inside to pay. Around here the small stations usually dont have ethanol also, which is a bonus.

Since you're having siding done I would get it out the side. You could go through the roof but by the time you figure on having someone out to do it, I'd imagine your siding guy is going to be much cheaper. I would also avoid that roofer as he is too lazy to do things right. You need to change...

I figure that sta-bil works. I put 10 gallons of gas and a full bottle of sta-bil into the tank of my Nissan, figuring it was going to sit for 9 months while I was at school. Fast forward 6 years and I finally got around to picking it up. Amazingly it ran (albiet a little rough) on the gas in...

It really wont change anything, and can cause more carbon buildup. When the octane rating goes up, you need an increase in either timing or compression to take advantage of the "premium" fuel. Some newer vehicles do this quite well (flex-fuel equiped in particular) but a majority won't have a...