C

Cas8101

Joined
Last seen
Messages
5
Reaction score
1

Latest activity Postings About

    • C
      Cas8101 replied to the thread Kohler Command 12.5CH.
      Ok so to confirm valves are not the issue I did a leak down test today. Only 10 percent leak down so good there. Have good compression...
    • C
      Cas8101 replied to the thread Kohler Command 12.5CH.
      Got it semi put back together last night to attempt to run it and check power output from welding leads/receptacles. It still runs the...
    • C
      Cas8101 replied to the thread Kohler Command 12.5CH.
      Waiting on a new exhaust manifold gasket and a couple orings for the carburetor. I had popped the cover on the valves to inspect rockers...
    • C
      Cas8101 reacted to repairman54's post in the thread Kohler Command 12.5CH with Like Like.
      Since that ''ear'' is open behind it, not a blind hole, I would nut and bolt it to get it running for testing if threads are bad rather...
    • C
      Cas8101 replied to the thread Kohler Command 12.5CH.
      With how the exhaust manifold gasket goes in between it and the muffler do you see sealing issues with leaving as is? I may try the...
    • C
      Cas8101 posted the thread Kohler Command 12.5CH in Lawn Mower and Small Engine.
      New here so bare with me. Working on a welder generator that is powered by a Kohler 12.5 command. Been sitting for years, got it to run...
      • IMG_9289.webp
      • IMG_9290.webp
    Show older items
  • Loading…
  • Loading…
Back
Top Bottom