Accent Abuser's latest activity

With all those codes I'd first do a compression test before throwing plugs/coils/injectors/vvt solenoids at it. Also check the oil, low...

One thing I really agree with him on is you can't just use TBN to determine proper drain intervals with modern ultra low sulfur fuels...

Even my gasser has this function lol

If I've learned anything being both a mechanic and a rideshare driver it's that most people drive like an idiot with 1 foot on the gas...

*Rust belt enters the chat*

I had the same issue until I started using a 50 grade in my Accent. I have seen plenty of modern engines (believe it or not Subaru is...

Wouldn't want innovative ideas and common sense dragging down the climate change discussion now would we?

Every one I've seen is a champ jobber ecore with a silicone adbv.

I've put thousands of ecogard filters on vehicles and only once did I have a leak and it was an old stock filter that sat on a shelf for...

You can't tell just from that. One of the cams may have jumped back 1/4 inch after shutting off the engine, no oil pressure to the...

230k

That's reassuring, the tensioner is hydraulic but it's also ratcheting so it should theoretically keep tension even if it bleeds down...

Doing a valve cover gasket today and notice the chain seems a bit loose. It doesn't make any noise and there's no slapping marks on the...

I didn't quote it high actually I think the Mitchell book time was about 2 hours or maybe over a hair. Some cars where it's obvious...

0 consumption.